By Mark J. Donovan
When installing ceramic tile flooring, you should use a thinset mortar versus an organic mastic adhesive. Though mastic comes ready-made and is easy to use, it does not stand up to the rigors required of ceramic tile flooring, even Type 1 Mastic.
Thinset mortar basically consists of Portland cement, sand and methylcellulose. The methylcellulose is used to slow the curing process to enable the tiles to be set.
The thinset mortar requires mixing with water and sometimes an acrylic latex additive if additional bonding strength is required. It is much more durable than even Type 1 Mastic, and is ideal for water prone areas.
There are a number of thinset mortar manufacturers and products. I would suggest staying away from the fast setting thinset mortars unless you are well familiar with the process of installing ceramic tile flooring.
You should read the instructions on the thinset mortar package to determine the right ratio mixture of water and thinset, however here are a few basic tips:
- The thinset mortar should be mixed with cold/cool water until there are no lumps and the consistency is creamy smooth.
- Warm water should not be used, as this will accelerate the setting time of the mortar.
- After the thinset mortar has been properly mixed it should be allowed to sit for 5-10 minutes to allow it to slake. (The slaking action allows the mortar to stiffen up a bit as the chemical bonding additives begin to work.)
One 50 pound bag of thinset mortar will cover an area of approximately 75-100 square feet, using a ¼” or 3/8” square notched trowel.
When installing the ceramic tile flooring, make sure you wipe away the thinset mortar from around the edge of the tiles using a slightly damp rag or a toothbrush. Otherwise, you will either spend an inordinate amount of time scraping away the thinset mortar after it dries or have the mortar visible as it pokes out around the grout lines.
If you are planning to use a light color grout you should use white thinset mortar, and if you are planning to use a dark grout color you should use a gray thinset mortar.
After installing the ceramic tile flooring allow 24-48 hours for the mortar to set up thoroughly.
For information on installing a shower pan membrane liner, see the Shower Pan Membrane Liner Installation EBook from HomeAdditionPlus.com. The Shower Pan Membrane Liner EBook will quickly teach you the step-by-step process for installing the shower pan membrane liner correctly. It includes instructions on framing the shower stall, pouring the pre-slope and shower base mortar, and installing the shower pan membrane liner.
About the Author: Over the past 20+ years Mark Donovan has been involved with building homes and additions to homes. His projects have included: building a vacation home, building additions and garages on to existing homes, and finishing unfinished homes. For more home improvement information visit http://www.homeadditionplus.com/ and http://www.homeaddition.blogspot.com/